Introduction: The dvr-specialized motherboard has the same function with the common computer motherboard, but it has more function than common computer motherboard. It can be professionally used in video surveillance security system. Compared with the common motherboard/main board in the market, the dvr-specialized motherboard is more stable and compatible in the usage capability.
It can be proved when you install the DVR card/ video capture card to use. When using the DVR-specialized motherboard, you do not need to change the mother board and graphic card in your original computer system configuration, which can save your time. No need to buy graphic card and connecting card, which can save your money. It has the watchdog function. When the computer shut off suddenly, it will restart automatically.
Product Features / Advantages:
Specially design BIOS on the dvr motherboard, and high-quality INTEL graphic card can share over 128MB RAM dynamically.It has the integrated Graphic card onboard.No need to buy graphic card.It can be compatible with all the DVR cards in the market.It is more economical and stable.
It has 4SATA HDD ports and use embedded clock signal, so it has powerful capacity of rectifying error. You can easily buy hard disk from market and four hard disks together can reach over 2000G.
It was designed especially for DVR and support turning on the system when electricity is on and restart when the electricity is off. It also has the watchdog function, which makes sure the system can be restarted automatically when the computer is frozen. So the DVR system can be operated by nobody on guard. Furthermore, it can be steady working in the condition of moisture, much dust, high temperature and other bad environment. It has a long lifetime.
LAN: Integrated Realtek 8100C 100/1000M Lan chip, supports Non-harddisk system
Storage Interface:
4*SATA 300MB/s ports
1*IDE,up to 2 IDE devices
Expansion Slots:
1*PCI Express 16X
4*PCI
2*PCI Expres s 1X
USB: 8*USB 2.0 ports(4 on the back panel, 4 connected to the internal USB header via the USB Cable)
Internal I/O Connectors:
1*24 PIN main power connector,1*4PIN 12V power connector.
4*SATA 300MB/s connectors,2*IDE
1*CPU fan header,1*system fan header
1*front panel header
1*front panel Audio header
2*USB 2.0 headers
1*COM header
1*Clearing CMOS jumper
1*LAN_EN jumper
3*Switchs
1*CD-IN header
1*KB_PWR jumper
Back Panel Connectors:
1*PS/2 keyboard port
1*PS/2 mouse port
1*COM port
1*VGA port
4*USB ports
1*RJ45 port
1*LPT port
3*JACKs
I/O: ITE8712F-S
H/W Monitoring:
CPU/System temperature detection
CPU/System/Power fan speed detection
System voltage detection(optional)
BIOS: 1*8Mbit flash
Form Factor: ATX 195mm x 294mm
Notice:
When install the CPU, pay attention to not touch the stitch/pin of the 775LGA; when delivery, please cover well the protection shell/case in the stitch/pin, because it is easy to damage and distortion.